







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Oakland Homeowners Choose KraftMaid Construction
Penhallow Remodeling Oakland provides independent KraftMaid construction service in Oakland, CA – cabinet installation, refacing, layout work, and repair on KraftMaid Vantage, Pendleton, Chatham, and Maple Heartwood lines. We’re not affiliated with or authorized by the manufacturer, which is the point: we specify, modify, and fit KraftMaid cabinetry to the room you actually have, not to what a dealer has in stock. Our technicians have up to 22 years of experience, and every job gets a written price before work starts plus our 365-Day Done Right Promise in writing.
Call (888) 403-1237 for a free estimate.
Why Trust Penhallow Remodeling Oakland for Your KraftMaid Construction?

KraftMaid’s semi-custom lines are built on a standardized box, and Oakland’s housing stock is anything but standardized. Much of the city’s housing dates to the 1900s-1920s – Victorian and Craftsman bungalows with floors that have settled and walls that are rarely plumb. We spend most of our KraftMaid time correcting for that gap: re-shimming boxes, scribing face frames, adjusting door reveals. That’s the work a factory badge doesn’t teach you.
Our technicians know which KraftMaid series use which hinge platform, which door styles are MDF versus solid wood, and where the finish is most likely to fail first. We source OEM-compatible KraftMaid hardware and trim when it’s available so replacements match the existing finish, and we use quality aftermarket soft-close glides and hinges when OEM parts are backordered or discontinued. Nothing we do voids the finish warranty: we don’t sand, strip, or refinish factory surfaces, and we don’t drill through finished cabinet faces without sealing the cut.
Every technician is background-checked and arrives in uniform. You’ll know who’s in your home. The price is written before we touch a cabinet, and the 365-Day Done Right Promise covers the work for a full year – if something fails, we come back and fix it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Oakland
- Soft-close glides on Vantage and Pendleton lines loosening or failing. After years of daily use, the glide’s mounting screws work loose from the cabinet side panel, and the drawer stops self-closing or won’t stay shut. Oakland’s humid winters accelerate this – the particleboard around the screw holes swells slightly, the screws lose bite, and the glide drifts out of alignment. The fix is usually new glides plus a hardened screw anchor, not a new drawer box.
- MDF door panels on painted Chatham series swelling or delaminating. Steam from a dishwasher venting into the cabinet run, or a slow under-sink leak, gets into the MDF core. The panel edges swell, the paint film lifts, and the door no longer sits flat. This is the most common KraftMaid failure we see in Oakland kitchens, and it’s often fixable by replacing only the affected doors and panels.
- Face frames and boxes racking out of square in older Oakland homes. When a cabinet run is installed against an out-of-level floor and wall without scribing, the box twists. Doors rub at the top corner, drawers slide open on their own, and the reveal lines go crooked. Re-shimming and re-anchoring the boxes to plumb and level solves most of it.
- Factory finishes on maple and oak doors checking or yellowing near heat. On Heartwood and similar lines, doors directly beside an oven or under a range hood see sustained heat that the finish wasn’t formulated for. The clear coat checks (fine cracks) or yellows. We assess whether the door can be replaced with a matched unit or needs a different heat-tolerant door style.
- Hinge screws pulling out of the face frame. Common on older Pendleton installations where the hinge plate was screwed into a thin section of face frame. The door starts to sag and the hinge plate eventually tears out. We fill and re-drill with proper anchors, or move the hinge to a fresh section of frame.
KraftMaid Parts & Our Repair-vs-Replace Approach

For KraftMaid hardware, we source OEM parts when they’re available, because matching the existing finish and hinge platform matters on a cabinet run you’re keeping. When an OEM glide or hinge is backordered or discontinued, we use high-quality aftermarket soft-close units with comparable load ratings and a warranty of their own. We tell you which you’re getting and why, in writing, before we order.
We don’t keep KraftMaid parts in local stock – each job is sourced to the specific series and finish. That means we quote exact parts, not a generic kit.
Our repair-vs-replace call is honest. Cabinets under 15 years old with good boxes are almost always worth repairing. Cabinets over 15 years old with structural issues – water-swollen boxes, cracked face frames, failed joints at the corners – usually cost more to repair correctly than to replace, and we’ll tell you that even when it means a smaller ticket for us. When MDF doors have swelled from under-sink moisture, we often replace just the affected doors and panels rather than the entire run.
Call (888) 403-1237 for a free estimate on the repair or the replacement – we’ll give you both numbers.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every drawer, operate every door, and check the cabinet run for plumb, level, and square. We look at the hinge platform and glide model so we know exactly which KraftMaid series and hardware generation we’re working with, and we identify any moisture or heat damage at the door panels.
- 2
Written repair or install plan. You get a written price before any work starts – parts, labor, and the specific scope. If we recommend repair over replacement, we say why and what the alternative costs.
- 3
Repair or installation. We re-shim and re-anchor boxes to plumb and level, replace glides and hinges, scribe face frames, and install or reface cabinetry. We protect floors and counters and keep the job site clean each day.
- 4
Test and adjust. Every drawer is cycled, every door checked for reveal and closing action, and the soft-close action verified under load. We don’t call a job done until the cabinet run operates the way it should.
- 5
Written warranty. You get the 365-Day Done Right Promise in writing. If a glide fails or a door works loose inside that year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Oakland
We work on KraftMaid Vantage, Pendleton, Chatham, and Maple Heartwood lines, along with older KraftMaid series that are no longer in production – we’ll identify the generation from the hinge and box construction. On the service side: cabinet installation, refacing, layout and design work on small and partial kitchen remodels, drawer and glide replacement, hinge replacement, door and panel replacement, and face-frame and box re-alignment. We also handle island installation and countertop and backsplash work alongside the cabinet job, so the whole kitchen is coordinated under one written price.
We Also Service These Brands
KraftMaid is one of several cabinet and fixture lines we work with. We also install and service Kohler fixtures, Cambria quartz countertops, Toto plumbing products, and Silestone quartz surfaces. That means we can coordinate a KraftMaid cabinet install with a Cambria countertop and Kohler sink under one written price, rather than handing you off to three separate trades and hoping they talk to each other.
FAQs – KraftMaid Construction Service in Oakland

Is Penhallow Remodeling Oakland authorized by KraftMaid? No. We’re an independent KraftMaid service provider, not affiliated with or authorized by the manufacturer. That independence is why we can modify, specify, and fit KraftMaid cabinets to Oakland’s older homes without being bound by dealer inventory or authorization constraints.
Do you use genuine KraftMaid/OEM parts? We source OEM KraftMaid hardware and trim when they’re available to match your existing finish, and we use high-quality aftermarket soft-close glides and hinges when OEM parts are backordered or discontinued. We tell you which you’re getting and why, in writing, before we order.
How long does KraftMaid service take? A glide or hinge replacement is usually a single visit. A cabinet run re-shim and re-alignment is typically a day. Door and panel replacement depends on lead time for the specific KraftMaid series and finish, and we give you the timeline in writing with the price.
What KraftMaid models/series do you cover? KraftMaid Vantage, Pendleton, Chatham, and Maple Heartwood, plus older KraftMaid series no longer in production – we identify the generation from the hinge and box construction.
Will service void my KraftMaid warranty? No. We don’t sand, strip, or refinish factory surfaces, and we don’t drill through finished cabinet faces without sealing the cut. Our work is done in a way that preserves the factory finish warranty, and our own 365-Day Done Right Promise backs the labor.
How much does KraftMaid construction cost in Oakland? Cabinet installation runs $4,000-$13,000, countertop installation $2,000-$6,500, backsplash installation $800-$2,500, island installation $3,000-$10,000, and a small kitchen remodel $9,000-$20,000. The cabinet cost depends on the number of boxes, the KraftMaid series, and how much scribing and re-shimming the room requires. Call (888) 403-1237 for an exact quote – estimates are free.
Book Your KraftMaid Service in Oakland, CA
If you own KraftMaid cabinets in Oakland and something isn’t working the way it should – a drawer that won’t close, a door that rubs, a panel that swelled – call (888) 403-1237. You’ll get a live person, a written price before any work starts, background-checked and uniformed technicians, and the 365-Day Done Right Promise in writing. Estimates are free.
Written by the team at Penhallow Remodeling Oakland.












